HYDROMATIC SEWAGE EJECTOR PUMPS
...............
MODEL SP40 IS A 4/10 HORSEPOWER PUMP SINGLE PHASE 115 OR 230 VOLT. HAS 2" DISCHARGE WITH A NON-CLOG, TWO-VANE THERMOPLASTIC SEWAGE-TYPE IMPELLER. RUGGED CAST IRON CONSTRUCTION. PUMP RATED FOR 1 1/4"MAX. SOLIDS SIZE. USED FOR RESIDENTIAL SEWAGE EJECTOR OR HIGH CAPACITY SUMP PUMP.
....................
MODEL SP50 IS A 1/2 HORSEPOWER 2" DISCHARGE PUMP. AVAILABLE IN SINGLE AND THREE PHASE CURRENT. HAS AN ENCLOSED, 2 VANE CAST IRON SEWAGE-TYPE IMPELLER. RUGGED CAST IRON CONSTRUCTION. PUMP RATED FOR 1 1/2"SOLIDS SIZE.
....................
MODEL SK50 IS A 4/10 HORSEPOWER, 2" OR 3" DISCHARGE. WILL HANDLE 2" SOLIDS. HAS A NON-CLOG 2 VANE, SIMI-OPEN SEWAGE -TYPE IMPELLER WITH PUMP-OUT VANES ON REAR SHROUD. RUGGED CAST IRON CONSTRUCTION. AVAILABLE IN SINGLE PHASE 115 OR 230 VOLT OPERATION.
.........................
| Superior Features: | Specifications: |
| •Cabon/Ceramic type 21mechanical seal | Pump Type: Sewage and high capacity effluent pump |
| •Oil filled motor with automatic reset thermal overload protection | Capacities: to 78 GPM (4.9 I/s) |
| •Lower single rowball bearing construction | Heads: to 19.5 ft (5.9m) |
| •Recessed vortex impeller allows pumping of stringy material and reduces clogging | Electrical: 115V, 1ø, 12 FLA, 60Hz; 230V, 1ø, 6.0 FLA, 60Hz |
| •Piggy-back plug available for easy maintenance and replacement | Motor: 4/10 HP split phase with thermal overload protection, 1750 RPM |
| Discharge Size: 2” NPT (50.8mm) | |
| Download PDF Sales Sheet | Solids Handling: 2” NPT (50.8mm) |
.........................
THE SKV50 IS A 2"SOLIDS HANDLING SEWAGE PUMP WITH 2" DISCHARGE. AVAILABLE IN SINGLE PHASE 115 VOLT. HAS A THERMOPLASTIC RECESSED VORTEX IMPELLER.
....................
....................
MODEL SK60 WILL HANDLE 2" SOLIDS. HORSEPOWER IS 6/10 AND IS AVAILABEL WITH 2" OR 3" DISCHARGE. HAS NON-CLOG, 2 VANE SEMI-OPEN CAST IRON IMPELLER WITH PUMP OUT VANES ON REAR SHROUD OF THE IMPELLER. AVAILABLE IN SINGLE AND THREE PHASE CURRENT.
....................
MODEL SK75 IS A 3/4 HORSEPOWER AND MODEL SK100 IS A 1 HORSEPOWER PUMP. EITHER IS AVAILABLE WITH 2" OR 3" DISCHARGE. HAS NON-CLOG, TWO VANE , SEMI-OPEN CAST IRON SEWAGE-TYPE IMPELLER. AVAILABLE IN SINGLE AND THREE PHASE CURRENT.
EMAIL US FOR A QUOTE ON YOUR NEXT APPLICATION.
